PRODUCTSThe current location :HOME > PRODUCTS > Concrete Structures detector
R800 Rebar locator multi-function + Rust Tester
  • R800 Rebar locator multi-function + Rust Tester
R800 Rebar locator multi-function + Rust Tester
【Brief】:Multifunctional detector:
• GENERAL-SCAN: standard scan for the localization of rebars, measuring rebar cover and estimate diameter bars and stirrups. The "General-Scan" is available as R630A and R800 (independently) with the probe "Small" or the probe "SET-200A".
• PROFILE-SCAN: this acquisition mode provides a view in section of the rebars. By entering the knowing cover value you can evaluate the deviation from this value for each bar or stirrup. The "Profile-Scan" is available as R630A and R800 only with the probe "SET-200A".
• GRID-SCAN: scan that allows to reconstruct the mesh of the rebars and evaluating their distribution within the element under investigation. The "Grid-Scan" is available as R630A and R800 only with the probe "SET-200A".
• RUSTY-TEST (mapping potential method): allows to evaluate the state of corrosion of steel with single or dual electrode. The "Rusty-Test" is available only as R800. The acquaired data are stored on the device's internal memory. The export is carried on USB device for transferring data processing software for data analysis and report generation test.

 

【Series】:Concrete Structures detector
The multi-functional rebar detectorR800 is used to determine:
1. localization and distribution of rebar [General-Scan];
2. Measure the thickness of rebar cover [General-Scan];
3. Measure the diameter of bars and stirrups [General-Scan];
4. Graphic reconstruction of the grid [Grid-Scan];
5. Display the rebars in section for assessing the deviation from the known rebar cover to each bar or stirrup [Profile-Scan];
6. Measurement of the potential corrosion of steel with single or dual electrode allowing the diagnosis of the state of corrosion [Rusty-Test].

 

• Diameters measurement range: Ф6mm~Ф50mm
• Maximum allowed error for diameters measurement: ±1 rebar standard level
• Protective layer thickness range (mm):
- First range: 3~98
- Second range: 3~196
• Maximum allowed error for protective layer (mm):
- ±1 First range: 6~56; Second range: 3~79
- ±2 First range: 57~69; Second range: 80~119
- ±4 First range: 70~98; Second range: 120~196
• Corrosion detection method: Single electrode / Double electrode
• Measuring range:
- Single electrode: ±1000mV
- Double electrode: 0~1000 mV
• Accuracy:
- Single electrode: ±1mV
- Double electrode: ±1mV
• Tested points interval X (cm):
- Single electrode: 0~100 adjustable
- Double electrode: 20 fixed
• Tested points interval Y (cm):
- Single electrode: 0~100 adjustable
- Double electrode: 0~100 adjustable
• Power: Built-in chargeable lithium battery
• Battery Time: >38 hours
• Dimensions: 212mm x 134mm x 50mm
• Weight: 0.9Kg
• USB port: thumb drive storage available
• Central unit Novascan R800
• Small Probe
• Large Multi-parameter probe
• Single electrode to test potential
• Double electrode to test potential
• Container of copper sulphate
• Professional software for analysis and reporting
• Battery charger
• USB drives with Instruction Manual
• Pencil
• Certificate of conformity
• Rigid suitcase for transport
Pre:R630A Rebar locator
Next:Multi-channel ultrasonic detector
ABOUT US
Company Profile
Company Culture
PRODUCTS
Concrete Structures detector
Pile foundation detector
Concrete drilling machine
NEWS
Company News
Industry News
CONTACT US
  • Tel:+86 18565330567
  • WhatsApp:+86 18565330567
  • E-mail:cnsdsnn@gmail.com
  • Address: No. 74, Huangcun West Road, Tianhe District, Guangzhou City